YN27C Rock Drill Daily Maintenance Guide

Date: 2024-10-15     Source: SDK      Author: admin

Daily Maintenance Guide for YN27C Rock Drill

The YN27C rock drill is a highly efficient rock drilling device widely used in mining, construction, geological exploration, and other fields. To ensure its long-term stable operation, daily maintenance is crucial. Below is the daily maintenance guide for the YN27C rock drill:

1. Regular Inspection and Cleaning
Visual Inspection: Every day before use, inspect the appearance of the rock drill to ensure there is no obvious damage or wear.
Clean the Machine: Clean the surface of the machine after use to remove dust, dirt, and oil contamination, keeping the equipment clean.

2. Lubrication Maintenance
Lubricant Check: Regularly check the oil level and quality of the lubricant, ensuring that the lubricant is sufficient and has not deteriorated.
Add Lubricant to Lubrication Points: According to the equipment manual, regularly add an appropriate amount of lubricant to each lubrication point to reduce wear on parts.

3. Air Filter Maintenance
Inspect the Air Filter: Regularly check the condition of the air filter, cleaning or replacing it as necessary to ensure that clean air enters the engine.
Clean the Filter Screen: After working in a dusty environment, clean the filter screen of the air filter promptly.

4. Fuel System Maintenance
Fuel Check: Regularly check the fuel level in the fuel tank to ensure there is enough fuel.
Fuel Filter: Regularly clean or replace the fuel filter to prevent impurities from entering the fuel system.

5. Cooling System Maintenance
Check Coolant: Regularly check the coolant level and temperature to ensure the cooling system is working properly.
Clean the Radiator: Regularly clean dust and debris from the radiator to ensure good heat dissipation.

6. Electrical System Maintenance
Inspect Wires and Connectors: Regularly check the electrical system’s wires and connectors to ensure they are not loose, damaged, or corroded.
Battery Maintenance: Regularly check the battery’s charge and terminal condition to ensure the battery is functioning normally.

7. Replacement of Wear Parts
Inspect Wear Parts: Regularly check the wear condition of consumable parts such as drill bits and drill rods, replacing them as necessary.
Manage Spare Parts: Keep a certain number of commonly used consumable parts in reserve to ensure they can be replaced promptly when needed.

8. Storage and Custody
Storage Environment: When not in use, store the equipment in a dry, ventilated environment, avoiding direct sunlight and rainwater exposure.
Rust Prevention: For long-term non-use, apply rust prevention treatment to metal parts by applying an appropriate amount of anti-rust oil.

9. Operational Standards
Correct Operation: Strictly follow the equipment operation regulations to avoid equipment damage due to improper operation.
Train Operators: Regularly train operators to improve their operational skills and safety awareness.

10. Record Maintenance
Maintenance Log: Establish an equipment maintenance log to record the date, content, and results of each maintenance session in detail, facilitating future reference and analysis.

By following these daily maintenance measures, you can effectively extend the service life of the YN27C rock drill, improve its work efficiency, and ensure reliability.